REMS Hydro-Swing 22V - Effortless working due to electro-hydraulic force transmission.
- Robust, compact drive unit with closed, maintenance free hydraulic system.
- Universal use for many tubes.
- Handy and light, only 5.3 lbs.
- Proven, reliable rachet feed.
- Simple, fast operation (e.g. bends 22mm (7/8") in only 18 seconds.
- Only one bender drive for the complete work range up to 32mm.
- Marked bending formers for exact bending.
- Crossover, swan-neck, reverse bends possible.
- Easy and rapid changing of bending formers.
- Reliable hydraulic thrust with overload protection.
- Bender recovered after a few bends through savings on fittings.
REMS Hydro Swing 22V - Cordless tube bender 10-22mm, 3/8-7/8", up to 90 degrees. Soft copper pipes 10-22mm, 3/8-7/8", soft coated copper pipes 10-18mm, 3/8-5/8", pipes of the press fitting systems made of stainless, nickel steel 12-22mm, soft coated carbon steel 12-18mm, soft precision steel pipes 10-22mm, composite tubes 14-22mm. Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W, robus planetary gear, eccentric reciprocating pump and compact high power hydraulic system. Safety tip switch. LED work light. battery Li-Ion 21.6 V, 1.5 Ah, rapid charger Li-Ion 220-240 V or 110 V, 50-60 Hz, 70 W. Up to 22mm with bending formers, back former support H-S 10-26mm with back formers. Up to 22mm with bending formers, 2 back former supports 10-22mm with back formers. In XL-Boxx system case.
Set - 3/8, 1/2", 5/8", 3/4", 7/8" (10-12-15-18-22)